APC NetShelter ES Enclosure 40U AR500 Manual De Usuario

14

The vertical mounting rails are preset for use with Compaq

®

 

rack-mountable equipment, at a depth of 29.13" (739 mm). 
Front and rear vertical mounting rails can be adjusted a total of 

3.23

" (82 mm) to accommodate different rails or components 

with various depths. You can also move the front and rear 
vertical mounting rails forward or backward within the 
enclosure by attaching them to the horizontal braces.

1. Use the 5 mm Allen wrench (included) to loosen (but not 

remove) the socket-head screws 

➼ in the slots ➽ of the ver-

tical mounting rail.

2. Slide the vertical mounting rail forward or rearward to the 

desired position. Tighten. 

Continued on next page