APC NetShelter ES Enclosure 40U AR500 Manual De Usuario
Los códigos de productos
AR500
15
Moving the rails
1. Refer to “Adjusting the rails” on page 14. Use the 5 mm
Allen wrench (included) to remove the socket-head screws
➼ in the slots ➽ of the vertical mounting rail.
2. Move the rail to its new position and secure it to each
horizontal brace
➾:
a. Insert a caged nut into the appropriate holes at the
new position on each horizontal brace.
b. Place the vertical mounting rail at the new position
and insert a socket-head screw through the rail and
tighten.
tighten.