Cisco Headend System Release 2.7 Notas de publicación
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
Chapter 2 DNCS Pre-Upgrade Procedures
42
4019475 Rev D
Verify that Boot Device is Correctly Configured
Before upgrading the DNCS, use the following procedure to verify that the boot
device is properly configured.
1 If necessary, open an xterm window on the DNCS.
2 Type eeprom boot-device and then press Enter.
3 Did you see disk:a listed as the boot device?
device is properly configured.
1 If necessary, open an xterm window on the DNCS.
2 Type eeprom boot-device and then press Enter.
3 Did you see disk:a listed as the boot device?
If yes, then you have completed this procedure.
If no, type eeprom boot-device=disk:a and then press Enter to reset the
default boot device to the original disk.
default boot device to the original disk.