Cisco Cisco D9824 Advanced Multi Decryption Receiver Guía De Instalación
Chapter 5 Web GUI Setup and Monitoring
200
78-4039426-01 Rev D
Setting up Import/Export Information
1 From the user interface of the D9824, click System Settings > Settings File >
Import/Export. The Import/Export page is displayed.
In the Device Settings File Transfer section, you can export and/or import
device settings and transport network information.
device settings and transport network information.
2 Select Export Device Settings & Transport Network Information and click
Export to download device settings and transport network information as a file
to the designated file folder.
to the designated file folder.
3 Select Export User Device Settings only and click Export to download user
settings as a file to the designated file folder.
4 In the Settings File, click Browse. The Choose File dialog opens.
Navigate to the appropriate folder and select the file with a .bkp file extension
and click Open. Click Import.
and click Open. Click Import.
5 The Configure Offline FTP Settings File Transfer section has backup and
restore controls.
Note: You must have access to an FTP Server (e.g. WinFTP) on a network or a
local PC before you can setup backup/restore controls.
Note: You must have access to an FTP Server (e.g. WinFTP) on a network or a
local PC before you can setup backup/restore controls.
6 Type the Settings Filename of the backup/restore file. You can enter up to 119
characters.
7 Set the FTP Server IP Address of the FTP server used to restore the
backup/restore file. The address is up to 12 characters in length (e.g.
171.300.100.200 and in the range from 0 to 255.
171.300.100.200 and in the range from 0 to 255.
8 Set the FTP User Name and FTP Password to access the FTP server.