Cisco Cisco Aironet 1200 Access Point Notas de publicación
10
Release Notes for Cisco Aironet 350, 1100, 1130AG, 1200, and 1230AG Series Access Points for Cisco IOS Release 12.3(2)JA
OL-6252-01
Installation Notes
Figure 2
Improper Power Configuration Using Two Power Sources
Configuring Power for 1130AG Access Points
The 1130AG access point disables the radio interfaces when the unit senses that the power source to
which it is connected does not provide enough power. Depending on your power source, you might need
to enter the power source type in the access point configuration. Use the System Software: System
Configuration page on the web-browser interface to select a power option.
which it is connected does not provide enough power. Depending on your power source, you might need
to enter the power source type in the access point configuration. Use the System Software: System
Configuration page on the web-browser interface to select a power option.
shows the System
Power Settings section of the System Configuration page.
Figure 3
Power Options on the System Software: System Configuration Page
Using the AC Power Adapter
If you use the AC power adapter to provide power to the 1130AG access point, you do not need to adjust
the access point configuration.
the access point configuration.
Using a Switch Capable of IEEE 802.3af Power Negotiation
If you use a switch to provide Power over Ethernet (PoE) to the 1130AG access point and the switch
supports the IEEE 802.3af power negotiation standard, select Power Negotiation on the System
Software: System Configuration page.
supports the IEEE 802.3af power negotiation standard, select Power Negotiation on the System
Software: System Configuration page.
Universal
power supply
SYST
RPS
DUPLX
MODE
SPEED
UTIL
STAT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
23
24
10Base-T / 10
0Base-TX
100Base-FX
Catalyst 2950
SERIES
Switch with
inline power or
power patch panel
Access point
74329