Cisco Cisco Web Security Appliance S380 Guía Del Usuario
C O N F I G U R I N G S M T P F R O M T H E C L I
C H A P T E R 2 1 : C O N F I G U R I N G N E T W O R K S E T T I N G S
483
2. Enter the information listed in Table 21-4.
3. Optionally, you can add more SMTP relay host information by clicking Add Row.
4. Submit and commit your changes.
Configuring SMTP from the CLI
Use the smtprelay command to configure SMTP relay hosts.
For example:
Table 21-4 SMTP Relay Host Settings
Property
Description
Relay Hostname or IP Address
Enter the host name or IP address to use for the SMTP relay
Port
Enter the port for connecting to the SMTP relay. If this
property is empty, the appliance uses port 25.
This property is optional.
property is empty, the appliance uses port 25.
This property is optional.
Routing Table to Use for SMTP
Choose the routing table associated with an appliance
network interface, either Management or Data, to use for
connecting to the SMTP relay. Choose whichever interface is
on the same network as the relay system.
network interface, either Management or Data, to use for
connecting to the SMTP relay. Choose whichever interface is
on the same network as the relay system.
example.com> smtprelay
No internal SMTP relay host configured.
Choose the operation you want to perform:
- NEW - Add a new host.
[]> new
Please enter the hostname of your relay host. You may put a colon
after the hostname to indicate a port to use other than 25, such as
“smtp.example.com:547”.
after the hostname to indicate a port to use other than 25, such as
“smtp.example.com:547”.