Cisco Cisco Web Security Appliance S680 Guía Del Usuario
13-7
Cisco IronPort AsyncOS 7.0 for Web User Guide
OL-23079-01
Chapter 13 Achieving Secure Mobility
Configuring Secure Mobility Using the CLI
Configuring Secure Mobility Using the CLI
describes the CLI commands you can use to configure and monitor
Secure Mobility Solution.
Table 13-1
Secure Mobility CLI Commands
Command
Description
musconfig
Use this command to enable Secure Mobility Solution and
configure how to identify remote users, either by IP address
or by integrating with one or more Cisco adaptive security
appliances.
configure how to identify remote users, either by IP address
or by integrating with one or more Cisco adaptive security
appliances.
Note: Changes made using this command cause the Web
Proxy to restart.
Proxy to restart.
For more information on enabling and configuring Secure
Mobility Solution, see
Mobility Solution, see
musstatus
Use this command to display information related to Secure
Mobility Solution when the Web Security appliance is
integrated with an adaptive security appliance.
Mobility Solution when the Web Security appliance is
integrated with an adaptive security appliance.
This command displays the following information:
•
The status of the Web Security appliance connection with
each adaptive security appliance.
each adaptive security appliance.
•
The duration of the Web Security appliance connection
with each adaptive security appliance in minutes.
with each adaptive security appliance in minutes.
•
The number of remote clients from each adaptive security
appliance.
appliance.
•
The number of remote clients being serviced, which is
defined as the number of remote clients that have passed
traffic through the Web Security appliance.
defined as the number of remote clients that have passed
traffic through the Web Security appliance.
•
The total number of remote clients.