Cisco Cisco Catalyst 6500 Series 7600 Series ASA Services Module Guía De Información

Cisco ASA Compatibility

ASA 5506W-X Wireless Access Point Software Compatibility

 

ASA 5506W-X Wireless Access Point Software 
Compatibility

The ASA 5506W-X includes a Cisco Aironet 702i wireless access point integrated into the ASA. The access point 
includes an autonomous Cisco IOS image, which enables individual device management. You can install the 
lightweight image if you want to add the ASA 5506W-X to a Cisco Unified Wireless Network and use a wireless 
LAN controller. See the 

 chapter in the Cisco Wireless 

Control Configuration Guide for more information about using the lightweight image in unified mode.

The following table shows the supported software for the access point as well as the supported Cisco Wireless 
LAN Controller software if you convert to unified mode.

ASA 5500 and Module Compatibility

Many ASA models support service and I/O modules. This section lists the modules supported for current and 
legacy ASA models.





Current Models

The following sections show the modules supported on each ASA model. To see the ASDM versions supported 
for each ASA version on your model, see 











Notes: 



For the IPS module, ASDM 7.1(6) and later are not compatible with IPS 7.3(2) and earlier. To manage an IPS 
module on an ASA, you must connect to the IPS IP address directly through your browser.



Except for ASA CX 9.3(2), ASA Software 9.1(5) is supported up to 9.1(5.21). With 9.1(5.21) and higher, CX 
9.3(2) or higher are the only supported CX releases.

ASA 5505 Advanced Inspection and Prevention (AIP) SSC-5

ASA 5506W-X Wireless Access Point Software Compatibility

Aironet 702i

15.3(3)JBB and later

8.1.102.0 and later

ASA 5505 AIP SSC Software Compatibility

6.2

(IPS 7.0 and later is not supported)

ASA 8.2(1) and later