Cisco Cisco MGX-FRSM-HS2 B Serial Frame Service Module
12
Cisco SM-X-1T3/E3 Enhanced Service Module Configuration Guide
OL-27148-02
Cisco SM-X-1T3/E3 Enhanced Service Module Configuration Guide
Configuring the SM-1T3/E3 Service Module
Configuring Scrambling
Perform this task to enable payload encryption on 2900 and 3900 Series ISRs:
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
interface serial slot/port
4.
scramble
5.
exit
DETAILED STEPS
Step 3
interface sm
slot/port
Example:
Router(config)# interface sm 1/1
Enters interface configuration mode to configure the
interface between the router and the enhanced service
module or between the enhanced service module and
Multi-Gigabit Fabric (MGF).
interface between the router and the enhanced service
module or between the enhanced service module and
Multi-Gigabit Fabric (MGF).
•
slot—Router slot in which the enhanced service
module is installed. Range: 1 to 4.
module is installed. Range: 1 to 4.
•
/ port—Port number of the module interface. The slash
mark (/) is required.
mark (/) is required.
Note
The backplane is always port 1. /port should always
be set to 1.
be set to 1.
Step 4
no shut
Example:
Router(config-if)# no shut
Enables the GE interface.
Step 5
exit
Example:
Router(config-if)# exit
Exits interface configuration mode and returns to privileged
EXEC mode.
EXEC mode.
Command or Action
Purpose
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
•
Enter the password if prompted.
Step 2
configure
terminal
Example:
Router# configure terminal
Enters global configuration mode.