Cisco Cisco UCS C22 M3 Rack Server Prospecto
3
Statement of Volatility for Cisco UCS Hardware
Cisco UCS B-Series Blade Servers
Clearing the CIMC Logs
Use the following procedure to clear the CIMC logs:
Step 1
Use the IP address of the server and log into the CIMC GUI interface.
Step 2
Select the Server tab.
Step 3
On the Server tab, click Faults and Logs.
Step 4
Select the CIMC Log tab.
Step 5
Click the Clear Log button at the bottom corner of the page.
Cisco UCS B-Series Blade Servers
The Cisco UCS B-Series blade servers have multiple serial, electrically erasable, and programmable
nonvolatile memory components (EEPROM and Flash memory) that are used to store manufacturing
hardware identification and hardware configuration information. The majority of serial EEPROMs and
flash memories are not written by users and contain no customer information. The following procedures
for clearing the few flash devices that can retain customer data are included in this section:
nonvolatile memory components (EEPROM and Flash memory) that are used to store manufacturing
hardware identification and hardware configuration information. The majority of serial EEPROMs and
flash memories are not written by users and contain no customer information. The following procedures
for clearing the few flash devices that can retain customer data are included in this section:
•
•
•
•
This section applies to the following servers:
•
Cisco UCS B200 M4
•
Cisco UCS B260 M4 and B460 M4
•
Cisco UCS B200 M3
•
Cisco UCS B420 M3
•
Cisco UCS B22 M3
•
Cisco UCS B200 M2
•
Cisco UCS B230 M2
•
Cisco UCS B250 M2
•
Cisco UCS B440 M2