Cisco Cisco MGX-FRSM-HS2 B Serial Frame Service Module Guía De Instalación
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
2
Catalyst 6500 Series Switch SSL Services Module Installation and Verification Note
78-15947-01
Front Panel Description
The SSL Services Module front panel (see
) includes a STATUS LED, a Federal Information
Processing Standards (FIPS) LED, a SHUTDOWN button, and a console port.
Figure 1
SSL Services Module Front Panel
These sections describe the SSL Services Module front panel:
•
•
•
•
Console Port
The console port is used for the inital configuration of the SSL Services Module. See the Catalyst 6500
Series SSL Services Module Software Configuration Note for more information on making the inital
configuration.
Series SSL Services Module Software Configuration Note for more information on making the inital
configuration.
Note
The initial SSL Services Module configuration must be made through a direct connection to the
console port. After the initial configurations, you can make an SSH or Telnet connection to the
module to further configure the module.
console port. After the initial configurations, you can make an SSH or Telnet connection to the
module to further configure the module.
STATUS LED
The STATUS LED indicates the operating states of the module.
describes the LED operation.
SSL SERVICES MODULE
SHUTDOWN
WS-SVC-SSL-1
FIPS
CONSOLE
STATUS
73756
STATUS LED
Console port
SHUTDOWN button
FIPS LED
Table 1
STATUS LED Description
Color
State
Description
Green
On
All diagnostic tests pass. The module is receiving power.
Red
On
A diagnostic other than an individual port test failed.