Cisco Cisco UCS B200 M4 Blade Server Hoja De Datos

Cisco UCS B260 M4 Blade Server (with Intel® Xeon E7 v2 CPU)

CONFIGURING the SERVER

STEP 1

VERIFY BASE SKU

Verify the product ID (PID) of the base server as shown in

Table 2

The B260 M4 base server:

■

Does not include CPUs, memory DIMMs, SSDs, HDDs, or mezzanine cards.

To upgrade from a B260 M4 server to a B460 M4 server:

■

Your current B260 M4 server must be configured with two identical Intel® Xeon® E7-8800 v2
or two identical E7-4800 v2 series processor family CPUs. A B260 M4 with E7-2800 v2 CPUs
cannot be upgraded.

■

Order the upgrade kit (PID UCSB-EX-M4-1E-U), which consists of the following:

— One Scalable M4 Blade Module

— One Scalability Connector

■

Configure the new Scalable M4 Blade Module with two Intel Xeon E7-8800 v2 or E7-4800 v2
series processor family CPU that are identical to the two processors in the B260 M4 server to
be upgraded.

■

Remove the Scalability Terminator from your original B260 M4. Install the new Scalable M4
Blade Module from the upgrade kit in the chassis slot above or below. Then install the new
Scalability Connector into the front of both blade modules, connecting them together. You
now have a B460 M4 server, consisting of two Scalable M4 Blade Modules ganged together by
the Scalability Connector.

Table 2 PID of the Base B260 M4 Server

Product ID (PID)

Description

UCSB-EX-M4-1C

UCS Scalable M4 Blade Module w/o CPU/DIMM/HDD for B260 M4

NOTE: Use the steps on the following pages to configure the server with
the components that you want to include.

NOTE: The B260 M4 server consists of a Scalable M4 Blade Module and a Scalability
Terminator that plugs into the front of the blade module.

NOTE: The two CPUs in the original B260 M4 server and the two CPUs in the Scalable
M4 Blade Module from the upgrade kit must be identical.