Cisco Cisco UCS C200 M2 High-Density Rack Server Hoja De Datos

Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Small Form Factor Disk Drive Model)

SUPPLEMENTAL MATERIAL

Recommended Memory Configuration

This section explains the recommended DIMM population order rules for the C220 M3 server.

■

All DIMMs must be DDR3 DIMMs.

■

Do not mix:

— DIMMs with different clock rates in a channel
— RDIMMs and LRDIMMs
— ECC and non-ECC DIMMs

■

There are blue and black DIMM slots. Populate blue slots first.

■

When single- and dual-rank DIMMs are populated for 2DPC, always populate the dual-rank
DIMM in the blue DIMM slot and the single-rank DIMM in the black DIMM slot.

Many memory configurations are possible. For best results, follow

Table 35

when populating 1600- and

1866-MHz DIMMs for Intel Xeon E5-2600 v2 CPUs and

Table 36

when populating 1600-MHz DIMMs for Intel

Xeon E5-2600 CPUs.

NOTE: These tables list only some recommended and suggested configurations.
There are numerous other possible configurations supported by Cisco. Cisco supports
all mixing and population configurations of the Cisco DIMMs as long as the mixing
does not violate the few fundamental rules noted in this document.

Table 35 Recommended Memory Configurations for Intel Xeon E5-2600 v2 CPUs (with 1600- and 1866-MHz DIMMs)

Total

System

Memory

Size

CPU 1 DIMMs

CPU 2 DIMMs

DIMM Max

Speed (MHz)

Total DIMMs

Blue Slots

Bank 1

(A1,B1, C1,D1)

Black Slots

Bank 2

(A2,B2, C2,D2)

Blue Slots

Bank 1

(E1,F1, G1,H1)

Black Slots

Bank 2

(E2,F2, G2,H2)

32 GB

4x4 GB

—

4x4 GB

—

N/A

2x8 GB

—

2x8 GB

—

1866

64 GB

4x4 GB

N/A

4x8 GB

—

4x8 GB

—

1866

96 GB

3x16 GB

—

3x16 GB

—

1866

4x8 GB

4x4 GB

4x8 GB

4x4 GB

N/A

128 GB

4x8 GB

1866

4x16 GB

—

4x16 GB

—

1866

192 GB

4x16 GB

4x8 GB

4x16 GB

4x8 GB

1866