Cisco Cisco VN 2900 Network Adaptation Interface Guía De Instalación
Installing Cisco Interface Cards in Cisco Access Routers
Installing Cisco Interface Cards in Cisco Access Routers
5
01-12842-03
Installing Cisco Interface Cards in Cisco Access Routers
This section describes installation tasks for Cisco interface cards used on Cisco access routers, and
contains the following subsections:
contains the following subsections:
•
Note
Before installing an ISDN BRI WAN interface card or an ISDN BRI network module in the same
chassis as an ISDN PRI network module, read
chassis as an ISDN PRI network module, read
restrictions.
•
–
–
–
–
–
•
•
Preparing to Install Cisco Interface Cards
When installing an interface card in a Cisco access router, perform the following tasks:
Table 1
Interface Card Hardware Installation Tasks for Cisco Access Routers
For All Cisco Access Routers Except Cisco 2800 and
Cisco 3800 Series Routers
Cisco 3800 Series Routers
For Cisco 2800 Series and Cisco 3800 Series Routers
Step 1
Turn off power to the router.
Turn off power to the router.
Step 2
Remove the blank faceplate from the slot you plan to use.
(See the
(See the
Remove the blank faceplate from the slot you plan to
use. (See the
use. (See the
Step 3
Install the interface card. (See the
.)
Prepare the slot for the interface card form factor you
are installing. (See the
are installing. (See the
.)
Step 4
Install blank faceplates where appropriate. (See the
.)
or
.)
Step 5
—
Install blank faceplates where appropriate. (See the