Cisco Cisco UCS B200 M2 Blade Server Hoja De Datos
Cisco UCS B460 M4 Blade Server (with Intel® Xeon E7 v3 CPU)
8
CONFIGURING the SERVER
STEP 1
VERIFY BASE SKU
Verify the product ID (PID) of the base server as shown in
.
The B460 M4 E7 v3 base server:
■
Includes two full-width Scalable M4 Blade Modules and a Scalability Connector that
interconnects the two Blade Modules.
interconnects the two Blade Modules.
■
Does not include CPUs, memory DIMMs, SSDs, HDDs, or mezzanine cards.
To upgrade from a B260 M4 E7 v3 server to a B460 M4 E7 v3 server:
■
Your current B260 E7 v3 M4 server must be configured with two identical Intel® Xeon®
E7-8800 v3 or two identical E7-4800 v3 series processor family CPUs.
E7-8800 v3 or two identical E7-4800 v3 series processor family CPUs.
■
Order the upgrade kit (PID UCSB-EX-M4-2E-U), which consists of the following:
— One Scalable M4 Blade Module
— One Scalability Connector
Table 2 PID of the Base B460 M4 E7 v3 Server
Product ID (PID)
Description
UCSB-EX-M4-2A
UCS Scalable M4 Blade Module w/o v3 CPU/DIMM/HDD for B460 M4
NOTE: Use the steps on the following pages to configure the server with
the components that you want to include.
the components that you want to include.
NOTE: The B460 M4 E7 v3 server consists of two Scalable M4 Blade Modules and a
Scalability Connector that cross-connects the two Blade Modules. The Blade Module
on the bottom is the “Master” and the Blade Module on the top is the “Slave”. The
optional USB flash and Flexible Flash cards must be mounted in the “Master” Blade
Module of B460 M4 E7 v3 server; if they are in the “Slave” Blade Module, they are not
recognized and do not operate.
Scalability Connector that cross-connects the two Blade Modules. The Blade Module
on the bottom is the “Master” and the Blade Module on the top is the “Slave”. The
optional USB flash and Flexible Flash cards must be mounted in the “Master” Blade
Module of B460 M4 E7 v3 server; if they are in the “Slave” Blade Module, they are not
recognized and do not operate.
NOTE: If the B460 M4 E7 v3 server is mixed with other full-width or half-width
blades in the chassis, the B460 M4 E7 v3 must occupy the bottom two full-width slots
in the chassis. The chassis should be loaded with the largest server on the bottom,
starting with B460 M4 E7 v3 on the bottom, followed by full-width blades above, and
the half-width blades at the very top of the chassis.
blades in the chassis, the B460 M4 E7 v3 must occupy the bottom two full-width slots
in the chassis. The chassis should be loaded with the largest server on the bottom,
starting with B460 M4 E7 v3 on the bottom, followed by full-width blades above, and
the half-width blades at the very top of the chassis.