Cisco Cisco UCS B200 M4 Blade Server Hoja De Datos
Cisco UCS B260 M4 Blade Server (with Intel® Xeon E7 v3 CPU)
8
CONFIGURING the SERVER
STEP 1
VERIFY BASE SKU
Verify the product ID (PID) of the base server as shown in
.
The B260 M4 E7 v3 base server:
■
Does not include CPUs, memory DIMMs, SSDs, HDDs, or mezzanine cards.
To upgrade from a B260 M4 E7 v3 server to a B460 M4 E7 v3 server:
■
Your current B260 M4 E7 v3 server must be configured with two identical Intel® Xeon®
E7-8800 v3 or two identical E7-4800 v3 series processor family CPUs.
E7-8800 v3 or two identical E7-4800 v3 series processor family CPUs.
■
Order the upgrade kit (PID UCSB-EX-M4-2E-U), which consists of the following:
— One Scalable M4 Blade Module
— One Scalability Connector
■
Configure the new Scalable M4 Blade Module with two Intel Xeon E7-8800 v3 or E7-4800 v3
series processor family CPU that are identical to the two processors in the B260 M4 E7 v3
server to be upgraded.
series processor family CPU that are identical to the two processors in the B260 M4 E7 v3
server to be upgraded.
■
Remove the Scalability Terminator from your original B260 M4 E7 v3. Install the new Scalable
M4 Blade Module from the upgrade kit in the chassis slot above or below. Then install the
new Scalability Connector into the front of both blade modules, connecting them together.
You now have a B460 M4 server, consisting of two Scalable M4 Blade Modules ganged
together by the Scalability Connector.
M4 Blade Module from the upgrade kit in the chassis slot above or below. Then install the
new Scalability Connector into the front of both blade modules, connecting them together.
You now have a B460 M4 server, consisting of two Scalable M4 Blade Modules ganged
together by the Scalability Connector.
Table 2 PID of the Base B260 M4 E7 v3 Server
Product ID (PID)
Description
UCSB-EX-M4-2C
UCS Scalable M4 Blade Module w/o v3 CPU/DIMM/HDD for B260 M4
NOTE: Use the steps on the following pages to configure the server with
the components that you want to include.
the components that you want to include.
NOTE: The B260 M4 E7 v3 server consists of a Scalable M4 Blade Module and a
Scalability Terminator that plugs into the front of the blade module.
Scalability Terminator that plugs into the front of the blade module.
NOTE: The two CPUs in the original B260 M4 E7 v3 server and the two CPUs in the
Scalable M4 Blade Module from the upgrade kit must be identical.
Scalable M4 Blade Module from the upgrade kit must be identical.