Cisco Cisco 12000 Series 12-Port DS3 Line Card
13
Ethernet Line Card Installation and Configuration
78-16361-03
Product Overviews
1-Port 10-Gigabit Ethernet Line Card
The 1-Port 10-Gigabit Ethernet line card provides the supported Cisco 12000 Series Routers with one
optical 802.3ae 10-Gigabit Ethernet interface. This interface provides a high-speed connection to other
network devices, such as Cisco 12000 Series Routers, or to other routers or layer-2 or layer-3 switches
that support 10-Gigabit Ethernet interfaces.
optical 802.3ae 10-Gigabit Ethernet interface. This interface provides a high-speed connection to other
network devices, such as Cisco 12000 Series Routers, or to other routers or layer-2 or layer-3 switches
that support 10-Gigabit Ethernet interfaces.
shows the front view of the line card.
The port on the front panel of the line card is port number 0. This port uses a hardwired laser optical
transceiver to provide a 10-Gigabit Ethernet optical interface. The transceiver consists of two optical
interfaces—laser transmit (TX) and laser receive (RX)—that use SC connectors.
transceiver to provide a 10-Gigabit Ethernet optical interface. The transceiver consists of two optical
interfaces—laser transmit (TX) and laser receive (RX)—that use SC connectors.
Next to the port on the line card are three green LEDs, aligned vertically and labeled from top to bottom
as follows: LINK, ACTIVE, and RX FRAME.
as follows: LINK, ACTIVE, and RX FRAME.
Figure 7
1-Port 10-Gigabit Ethernet Line Card
summarizes the optics and connectors used by the 1-Port 10-Gigabit Ethernet line card.
For more information, refer to the
and the
The 1-Port 10-Gigabit Ethernet line card ships with 256 MB of route processor memory and 512 MB of
packet memory. The memory in the 1-Port 10-Gigabit Ethernet line card is not field replaceable. For
more information on memory, see the
packet memory. The memory in the 1-Port 10-Gigabit Ethernet line card is not field replaceable. For
more information on memory, see the
.
1
Ejector lever
3
RX port
5
Alphanumeric LEDs
2
TX port
4
Status LEDs
6
Ejector lever
98893
6
TX
RX
1X10GE-LR-SC
LINK
ACTIVE
RX FRAME
5
1
2
3
4
Table 10
1-Port 10-Gigabit Ethernet Line Card Optics and Connector Types
Part Number
Optics/Transmission
Maximum Distance
Connector Type
1X10GE-LR-SC
1550 nm (send),
1300 nm-1570 nm (receive)
1300 nm-1570 nm (receive)
20 km
SC
1X10GE-ER-SC
1550 nm (send),
1300 nm-1570 nm (receive)
1300 nm-1570 nm (receive)
75 km
SC