Cisco Cisco Firepower Management Center 2000 Notas de publicación
1
Cisco Systems, Inc.
www.cisco.com
Firepower System Release Notes for
Version 6.0.1 Pre-Install
First Published: November 4, 2016
Last Updated: November 22, 2016
Last Updated: November 22, 2016
This update is for Firepower Management Centers only. The Version 6.0.1 Pre-Install optimizes the update procedure for
Version 6.0.1 and decreases the time the update takes to complete. Once you install Version 6.0.1 Pre-Install, update
the system to Version 6.0.1. Once you install the Version 6.0.0 Pre-Install, update the system to Version 6.0.1. For more
information, see the Firepower System Release Notes Version 6.0.1.
Version 6.0.1 and decreases the time the update takes to complete. Once you install Version 6.0.1 Pre-Install, update
the system to Version 6.0.1. Once you install the Version 6.0.0 Pre-Install, update the system to Version 6.0.1. For more
information, see the Firepower System Release Notes Version 6.0.1.
These release notes provide installation instructions and a summary of the defects resolved by the Firepower System
Version 6.0.1 Pre-Install.
Version 6.0.1 Pre-Install.
Even if you are familiar with the update and reimage process, make sure you thoroughly read and understand these
release notes, which describes prerequisites, warnings, and installation.
release notes, which describes prerequisites, warnings, and installation.
For detailed information on the Firepower System, refer to the online help or download the Firepower Management
Center Configuration Guide from the Support site. You must install the Firepower System Version 6.0.1 Pre-Install prior
to updating to Version 6.0.1.
Center Configuration Guide from the Support site. You must install the Firepower System Version 6.0.1 Pre-Install prior
to updating to Version 6.0.1.
For more information, see the following sections:
Before You Begin
Before you begin the update process for Version 6.0.1 Pre-Install, you should familiarize yourself with the behavior of the
system during the update process, as well as with any compatibility issues or required pre- or post-update configuration
changes.
system during the update process, as well as with any compatibility issues or required pre- or post-update configuration
changes.
A Firepower Management Center must be running at least Version 6.0.0 to install the Version 6.0.1 Pre-Install. If you are
running an earlier version, you can obtain updates from the Support site.
running an earlier version, you can obtain updates from the Support site.
The Version 6.0.1 Pre-Install only applies to Firepower Management Centers. Do not install the Version 6.0.1 Pre-Install
on managed devices.
on managed devices.
Caution:
Cisco strongly recommends you perform the update in a maintenance window or at a time when the
interruption will have the least impact on your deployment.
For more information, see the following sections: