Cisco Cisco Content Security Management Appliance M390 Guía Del Usuario
14-39
AsyncOS 9.1 for Cisco Content Security Management Appliances User Guide
Chapter 14 Common Administrative Tasks
Configuring the System Time
Procedure
Step 1
On the Management Appliance > Network > Routing page, click Add Route in the route listing. The
Enter a name for the route.
Enter a name for the route.
Step 2
Enter the destination IP address.
Step 3
Enter the gateway IP address.
Step 4
Submit and commit your changes.
Modifying the Default Gateway (GUI)
Procedure
Step 1
Click Default Route in the route listing on the Routing page.
Step 2
Change the gateway IP address.
Step 3
Submit and commit your changes.
Configuring the Default Gateway
You can configure the default gateway via the GUI through the Management Appliance > Network >
Routing page (see
Routing page (see
) or via the
setgateway
command
in the CLI.
Configuring the System Time
Note
When gathering data for reports, the Security Management appliance applies the time stamp from the
information that was set when you configured the time settings on the Security Management appliance.
For information, see
information that was set when you configured the time settings on the Security Management appliance.
For information, see
.
To set time-related settings using the command-line interface, use the
ntpconfig
,
settime
, and
settz
commands.