Cisco Cisco Content Security Management Appliance M1070 Guía Del Usuario
13-18
AsyncOS 9.6 for Cisco Content Security Management Appliances User Guide
Chapter 13 Distributing Administrative Tasks
About Authenticating Administrative Users
Step 5
Enter the port number for the RADIUS server. The default port number is 1812.
Step 6
Enter the Shared Secret key for the RADIUS server.
Note
When enabling external authentication for a cluster of Email Security appliances, enter the same
Shared Secret key on all appliances in the cluster.
Shared Secret key on all appliances in the cluster.
Step 7
Enter the number of seconds that the appliance waits for a response from the server before timing out.
Step 8
Select whether to use Password Authentication Protocol (PAP) or Challenge Handshake Authentication
Protocol (CHAP) for the authentication protocol.
Protocol (CHAP) for the authentication protocol.
Step 9
(Optional) Click Add Row to add another RADIUS server. Repeat steps
that your appliance uses for authentication.
When you define multiple external servers, the appliance connects to the servers in the order defined on
the appliance. You might want to define multiple external servers to allow for failover in case one server
is temporarily unavailable.
the appliance. You might want to define multiple external servers to allow for failover in case one server
is temporarily unavailable.
Step 10
Enter the amount of time to store external authentication credentials in the web user interface.
Note
If the RADIUS server uses one-time passwords, for example passwords created from a token,
enter zero (0). When the value is set to zero, AsyncOS does not contact the RADIUS server again
to authenticate during the current session.
enter zero (0). When the value is set to zero, AsyncOS does not contact the RADIUS server again
to authenticate during the current session.