Cisco Cisco MDS 9000 NX-OS Software Release 7.3 Notas de publicación
IPsec Support for Cisco MDS 24/10 port SAN Extension Module
In Cisco MDS NX-OS Release 7.3(0)DY(1), IPsec is not supported on Cisco MDS 9700 Series Directors with Cisco MDS 24/
10 port SAN Extension Modules.
10 port SAN Extension Modules.
Caveats
•
•
•
•
•
•
Resolved Caveats in Cisco MDS NX-OS Release 7.3(0)DY(1)
Table 10
Resolved Caveats in Cisco MDS NX-OS Release 7.3(0)DY(1)
Open Caveats in Cisco MDS NX-OS Release 7.3(0)DY(1)
Identifier
Description
FCIP max-bandwidth command does not limit transmission rate on MDS
9250i.
9250i.
Switch Accepts GPN_ID when port is already offline.
SPAN session stalls the traffic between 16G FC and 40G FCoE linecards.
"switchport fill-pattern IDLE/ARBFF speed 8000" is getting applied on 16G.
'fcrxbbcredit extended' commands ignored during reboot.
Table 11
Open Caveats in Cisco MDS NX-OS Release 7.3(0)DY(1)
Identifier
Description
24/10 SAN extension module: FCIP failed to come up after reconfiguring with
IPv6.
IPv6.
Remove no option for 10G-speed-mode and 1G-speed-mode commands.
"show ipv6 traffic" command not retrieving IPv6 and ICMP statistics.
FCIP WA in between 24/10 SAN extension module on MDS 9700 and MDS
9250i/SSN16/18+4 does not work.
9250i/SSN16/18+4 does not work.