Cisco Cisco IOS Software Release 12.4(23) Notas de publicación
33
Release Notes for Cisco IOS Release 12.4
OL-7661-15
Platform-Specific Information
Cisco MWR 1900 Series Routers
This section contains the following sections with information that is specific to the Cisco 1900 series
routers:
routers:
•
•
•
•
Introduction
The Cisco MWR 1900 series of routers consists of the Cisco MWR 1941-DC Mobile Wireless Edge
Router, which is a networking platform that is optimized for use in mobile wireless networks. Cisco IOS
Release 12.4 supports the Cisco MWR 1941-DC router for use at a cell site edge as a part of an IP Radio
Access Network (IP-RAN).
Router, which is a networking platform that is optimized for use in mobile wireless networks. Cisco IOS
Release 12.4 supports the Cisco MWR 1941-DC router for use at a cell site edge as a part of an IP Radio
Access Network (IP-RAN).
Note
Future releases of Cisco IOS Release 12.4 may support the Cisco MWR 1941-DC router for use at a cell
site edge as a part of a cell site Data Communications Network (DCN).
site edge as a part of a cell site Data Communications Network (DCN).
The Cisco MWR 1941-DC router offers high performance at a low cost while meeting the critical
requirements for deployment in cell sites, including small size, high availability, and DC input power
flexibility.
requirements for deployment in cell sites, including small size, high availability, and DC input power
flexibility.
The Cisco MWR 1941-DC router provides two fixed LAN 10/100 BASE-T Ethernet ports and three
WIC/VIC expansion slots (however, the third slot is supported in a DCN implementation only, as is the
single network module slot).
WIC/VIC expansion slots (however, the third slot is supported in a DCN implementation only, as is the
single network module slot).
For detailed information about the Cisco MWR 1900 series of routers, see the documents at the
following location:
following location:
Memory Recommendations
For memory recommendations for the Cisco MWR 1900 series routers in Cisco IOS Release 12.4, see
the
the
Supported Hardware
For detailed descriptions of the new hardware features, see the
“New and Changed Information” section
on page 99
.
For additional information about supported hardware for this platform and release, see the
Cisco Software Advisor at the following location:
Cisco Software Advisor at the following location:
The Cisco MWR 1941-DC router supports the following Voice/WAN interface cards (VWICs) in
Cisco IOS Release 12.4:
Cisco IOS Release 12.4:
•
2-port E1/Fractional E1 Drop and Insert Multiflex Trunk Interface Card (VWIC-2MFT-E1-DIR)
•
2-port T1/Fractional T1 Drop and Insert Multiflex Trunk Interface Card (VWIC-2MFT-T1-DIR)