Cisco Cisco IOS Software Release 12.2(15)ZL Notas de publicación
11
New and Changed Information
OL-4262-01
New and Changed Information
New and Changed Information
The following section lists the new hardware and software features supported by the Cisco ICS 7750,
beginning with Cisco IOS software Release 12.2(15)ZL.
beginning with Cisco IOS software Release 12.2(15)ZL.
New Hardware Features in Release 12.2(15)ZL
Cisco IOS Release 12.2(15)ZL on the Cisco ICS 7750 supports the following new interface cards:
•
•
•
Two-Port Ear and Mouth VIC (VIC2-2E/M)
Cisco IOS Release 12.2(15)ZL supports the two-port E&M VIC (VIC2-2E/M). You can use the
VIC2-2E/M to connect to PBX or key system trunk lines.
VIC2-2E/M to connect to PBX or key system trunk lines.
Four-Port Foreign Exchange Office Voice Interface Card (VIC2-4FXO)
Cisco IOS Release 12.2(15)ZL supports the four-port FXO voice interface card (VIC2-4FXO). You can
use the VIC2-4FXO to connect to Private Branch Exchanges (PBXs) or key systems and to provide
off-premises connections.
use the VIC2-4FXO to connect to Private Branch Exchanges (PBXs) or key systems and to provide
off-premises connections.
The VIC2-4FXO is a universal FXO card that supports the following types of FXO interfaces:
•
FXO
•
FXO-M1—An FXO enhancement with battery reversal and Caller ID feature support for North
America
America
•
FXO-M2—An FXO enhancement with battery reversal and Caller ID feature support for Europe
•
FXO-M3—An FXO enhancement with battery reversal feature support for Australia
Note
You can use H.323 with the Caller ID and battery reversal answer supervision features on the
VIC2-4FXO. For interfaces that are configured to use FXO-M1, Media Gateway Control
Protocol (MGCP) on the VIC2-4FXO is supported, but not with Caller ID or battery reversal
detection.
VIC2-4FXO. For interfaces that are configured to use FXO-M1, Media Gateway Control
Protocol (MGCP) on the VIC2-4FXO is supported, but not with Caller ID or battery reversal
detection.
Two-Port Integrated Services Digital Network Basic Rate Interface VIC (VIC2-2BRI)
Cisco IOS Release 12.2(15)ZL supports the two-port ISDN BRI VIC (VIC2-2BRI). You can use the
VIC2-2BRI to connect to ISDN PBXs or key systems. The VIC2-2BRI supports the following
functionality:
VIC2-2BRI to connect to ISDN PBXs or key systems. The VIC2-2BRI supports the following
functionality:
•
S/T—Terminal Equipment (TE). Connects to an ISDN WAN through an external NT1 device.
•
NT/TE—Network Termination (NT) or TE. Connects to a central office (CO) switch or PBX that
provides Network Termination.
provides Network Termination.