Cisco Cisco IOS Software Release 12.4(2)XB6 Notas de publicación

This is a cosmetic error. With the fix, this message will only be seen with debugs enabled.

This is seen on voice routers.

There is no workaround.

CSCsg78801: 4.x MinHits or 5.0 event-count not summarizing correctly

Min hit or event count not resetting correctly

Will fire signature on 1st occurrence of event, but never resets correctly so may or may not 

continue to fire signature. 

There is no workaround.

CSCsg90212: VSA: Add code to handle CRNG failure interrupt

When VSA encounters a Continual RNG failure, the IOS will print the message

VSA encountered CRNG failure

There is no workaround.

The following sections describe the documentation available for the Cisco 2691 and Cisco 2600XM 
series routers. Typically, these documents consist of hardware and software installation guides, Cisco 
IOS configuration and command references, system error messages, feature modules, and other 
documents. Documentation is available as printed manuals or electronic documents, except for feature 
modules, which are available online on 

 and the Documentation CD.

Use these release notes with the documents listed in the following sections:

The following documents are specific to Release 12.4 and apply to Cisco IOS Release 12.4(11)XJ. They 
are located on 

 and the Documentation CD (under the heading Service & Support):

To reach the 

, click this path:

:

:

 Release 12.4

:

 Release Notes

: Cisco IOS

 

To see other features that are supported on various Cisco platforms in Cisco IOS Cisco IOS 
Release 12.4(11)XJ, go to the following document on Cisco.com: