Cisco Cisco IOS Software Release 12.2(33)SRE
RSVP Fast Local Repair
How to Configure RSVP FLR
4
Cisco IOS Release 12.2(33)SRB
How to Configure RSVP FLR
You can configure the RSVP FLR parameters in any order that you want.
This section contains the following procedures:
•
(required)
•
(required)
•
(required)
•
(optional)
Configuring the RSVP FLR Wait Time
Perform this task to configure the RSVP FLR wait time.
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
interface type number
4.
ip rsvp bandwidth [interface-kbps] [single-flow-kbps]
5.
ip rsvp signalling fast-local-repair wait-time interval
6.
end
DETAILED STEPS
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
•
Enter your password if prompted.
Step 2
configure
terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
interface
type number
Example:
Router(config)# interface Ethernet0/0
Configures the interface type and enters interface
configuration mode.
configuration mode.