Cisco Cisco IOS Software Release 12.2(35)SE Notas de publicación
7
Release Notes for the Cisco Catalyst Blade Switch 3030, Cisco IOS Release 12.2(35)SE and Later
OL-11486-02
Installation Notes
Installation Notes
You can assign IP information to your switch by using these methods:
•
The CLI-based setup program, as described in the switch hardware installation guide.
•
The DHCP-based autoconfiguration, as described in the switch software configuration guide.
•
Manually assigning an IP address, as described in the switch software configuration guide.
New Software Feature
This release supports Web authentication to authenticate a supplicant (client) that does not support IEEE
802.1x functionality. For more information, see the
802.1x functionality. For more information, see the
.
Limitations and Restrictions
You should review this section before you begin working with the switch. These are known limitations
that will not be fixed, and there is not always a workaround. Some features might not work as
documented, and some features could be affected by recent changes to the switch hardware or software.
that will not be fixed, and there is not always a workaround. Some features might not work as
documented, and some features could be affected by recent changes to the switch hardware or software.
This section contains these limitations:
•
•
Cisco IOS Limitations
These limitations apply to the switch:
•
•
•
•
•
•
•
•
•
•