Cisco Cisco IOS Software Release 12.2(35)SE Notas de publicación
3
Release Notes for the Cisco Catalyst Blade Switch 3130 and 3032 for Dell, Cisco IOS Release 12.2(46)SE
OL-16967-01
System Requirements
Caution
The Cisco Catalyst Blade Switch 3130 for Dell does not support switch stacks with other types of blade
switches as members. Combining the Cisco Catalyst Blade Switch 3130 for Dell with other types of
blade switches in a switch stack might cause the switch to work improperly or to fail.
switches as members. Combining the Cisco Catalyst Blade Switch 3130 for Dell with other types of
blade switches in a switch stack might cause the switch to work improperly or to fail.
Device Manager System Requirements
These sections describe the hardware and software requirements for using the device manager:
•
•
Hardware Requirements
lists the minimum hardware requirements for running the device manager.
Cisco X2 transceiver modules
(supported only on the
CBS3130X-S model)
(supported only on the
CBS3130X-S model)
X2-10GB-SR V02 or later
X2-10GB-CX4 V03 or later
X2-10GB-LRM V03 or later
X2-10GB-CX4 V03 or later
X2-10GB-LRM V03 or later
Cisco IOS Release 12.2(40)EX1
Cisco TwinGig Converter Module
Dual SFP
3
X2 converter module to
allow the switch to support SFP
Gigabit Ethernet modules
Gigabit Ethernet modules
Cisco IOS Release 12.2(40)EX1
SFP modules
1000BASE-LX/LH
1000BASE-SX
1000BASE-T
1000BASE-SX
1000BASE-T
Cisco IOS Release 12.2(40)EX1
1.
This switch supports only the IP base software image.
2.
X2 supported only on the CBS3130X-S model.
3.
SFP = small form-factor pluggable.
Table 1
Cisco Catalyst Blade Switch 3130 for Dell and 3032 for Dell Supported Hardware (continued)
Switch Hardware
Description
Supported by Minimum Cisco IOS Release
Table 2
Minimum Hardware Requirements
Processor Speed
DRAM
Number of Colors
Resolution
Font Size
233 MHz minimum
1
1.
We recommend 1 GHz.
512 MB
2
2.
We recommend 1-GB DRAM.
256
1024 x 768
Small