Cisco Cisco IPS 4255 Sensor Notas de publicación

Click Deploy in the popup and follow the instructions.

This section describes how to reimage the sensor using the system image, and contains the following 
topics:

This procedure is for the IPS 4240, but is also applicable to the IPS 4255. The system image for the 
IPS 4255 has “4255” in the filename. 

You can install the IPS 4240 and IPS 4255 system image by using the ROMMON on the appliance to 
TFTP the system image onto the compact flash device. 

To install the IPS 4240 and IPS 4255 system image, follow these steps:

Download the IPS 4240 system image file to the tftp root directory of a TFTP server that is accessible 
from your IPS 4240. 

Make sure you can access the TFTP server location from the network connected to the Ethernet 
port of your IPS 4240.

Boot the IPS 4240.

Booting system, please wait... 

CISCO SYSTEMS 

Embedded BIOS Version 1.0(5)0 09/14/04 12:23:35.90

Low Memory: 631 KB

High Memory: 2048 MB

PCI Device Table.

Bus Dev Func VendID DevID Class              Irq

00  00  00   8086   2578  Host Bridge        

00  01  00   8086   2579  PCI-to-PCI Bridge  

00  03  00   8086   257B  PCI-to-PCI Bridge