Cisco Cisco Aironet 1552WU Outdoor Access Point Notas de publicación
6
Release Notes for Cisco Aironet Access Points and Bridges for Cisco IOS Release 15.2(2)JB
OL-28357-01
New Features
The Spectrum Expert mode is supported in all CleanAir-enabled access points such as the AP3500,
AP3600, AP2600, and AP1550 series.
AP3600, AP2600, and AP1550 series.
Configuring Spectrum Expert Connection
To configure the access point as a Spectrum Expert, use the following commands:
•
AP(config)#interface dot11Radio 0
•
AP(config-if)#station-role spectrum
•
AP# show spectrum status
Spectrum Expert is supported only on Internet Explorer. Before launching Spectrum Expert, change the
following settings:
following settings:
Step 1
Choose Tools > Internet options > Security > custom level > ActiveX Controls & plug-ins >
Initialize and script ActiveX controls not marked as safe for scripting.
Initialize and script ActiveX controls not marked as safe for scripting.
Step 2
Click the Enable radio button.
You can ignore the following popup message:
Your current security settings put computer at risk
.
Support for Secure Copy Protocol
The Secure Copy Protocol (SCP) supports file transfers between hosts on a network using Secure Shell
(SSH) for security. Cisco IOS Release 15.2(2)JB supports SCP file transfers to and from an access point
while you are logged into the access point itself.
(SSH) for security. Cisco IOS Release 15.2(2)JB supports SCP file transfers to and from an access point
while you are logged into the access point itself.
AAA authentication is used to restrict the transfer of data. SCP enables AAA authorization to ascertain
your username and password to ensure the authenticity and confidentiality of the data in transit.
your username and password to ensure the authenticity and confidentiality of the data in transit.
To configure SSH, use the following commands:
•
ip hostname
•
ip domain-name
•
crypto key generate rsa (512, 1024,2048)
•
ip SSH version
•
aaa new-model
•
aaa authentication login default local
•
aaa authorization exec default local
•
username cisco privilege 15 password 0 cisco
To perform SCP, use the following command:
copy run scp://url
Easy Setup
You can now configure a network in a single screen using the Easy GUI.