Cisco Cisco Aironet 1552WU Outdoor Access Point Guía De Instalación

Screw the M8 nut onto the pole clamp bracket support bolt, and hand-tighten the 
nut just enough to prevent the bolt from falling off.

To mount the access point onto a vertical pole or streetlight pole, follow these 
steps:

Select a mounting location on the pole to mount the access point. You can attach 
the access point to any pole from 2 to 16 inches (5.1 to 40.6 cm) in diameter.

If you are using a streetlight power tap adapter, position the access point 
within 3 feet (1 m) of the outdoor light control.

For poles larger than 3.5 inches (8.9 cm) in diameter, mount the pole clamp 
bracket assembly to a pole using two metal straps. Following the instructions 
provided with the banding strap tool (BAND IT; AIR-BAND-INST-TL=), loop 
each metal strap twice through the slots on the strap bracket.

Do not place the metal straps in the large open area between the pole clamp 
bracket and the strap brackets, because this arrangement does not properly secure 
the access point.

 shows the metal straps and the clamp bracket assembly on a pole with a 

diameter larger than 3.5 inches (8.9 cm).

M8 x1.25 x16 bolts (with 
lock washers)

Strap bracket (shown positioned for 
11 to 16-in. diameter pole)

Pole clamp bracket