Cisco Cisco Aironet 1552WU Outdoor Access Point Guía De Instalación

Descargar
Página de 60
19
 
Figure 11
Access Point External Antenna Connectors - Models AP-CAP1552EU-x-K9 and 
AP-CAP1552CU-x-K9 only
2
3
1
345675
1
N-Type Connector - Antenna port 1 (TX/RX)
3
N-Type Connector - Antenna port 3 (TX/RX)
2
N-Type Connector - Antenna port 2 (RX)
Note
The FCC limits the amount of power this device can transmit. Power transmitted is a 
combination of the amplification of the signal and the antenna gain. The access point has been 
designed to operate with the Cisco provided antennas.
Integrated Antenna Option
The 1552C and 1552I models use the Integrated Low Profile Dual-Band 2.4/5 GHz Dipole Antenna 
Array. The antenna contains an array of three dual-band dipole antennas. The three dipole antennas are 
contained within this single radome, thereby greatly reducing the antennas visual footprint, and greatly 
reducing the possibility of snagging the antenna on the cable bundle, the RF cable, or test cables. The 
antennas operate over both 2.4 GHz and 5.25 – 5.85 GHz bands. Each of the three dipole antennas is a 
dual-band antenna, covering both the 2.4 – 2.483 GHz band, and the 5.25 – 5.85 GHz bands. The antenna 
have a peak gain of about 2 dBi at 2.4 GHz and 4 dBi at 5 GHz. The antenna unit is gray weatherproof 
radome for outdoor operation.