Cisco Cisco Aironet 1552WU Outdoor Access Point Guía De Instalación
24
Warning
To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord.
Statement 1023
Statement 1023
The Ethernet cable must be a shielded outdoor rated Category 5e (CAT5e) or better cable. The access
point senses the Ethernet and power signals and automatically switches internal circuitry to match the
cable connections.
point senses the Ethernet and power signals and automatically switches internal circuitry to match the
cable connections.
Caution
To provide inline PoE, you must use the 1500 power injector (AIR-PWRINJ1500-2=).
Other power injectors, PoE switches, and 802.3af power sources cannot provide adequate
power, which may cause the access point to malfunction and cause possible over-current
conditions at the power source.
Other power injectors, PoE switches, and 802.3af power sources cannot provide adequate
power, which may cause the access point to malfunction and cause possible over-current
conditions at the power source.
Cable Option
The access point POC cable modem configuration contains an internal cable modem for connection to
the cable network from the pole-mounted cable lines. The access point can be powered using the 40-to
90-VAC (quasi-square wave AC) power provided by the cable network.
the cable network from the pole-mounted cable lines. The access point can be powered using the 40-to
90-VAC (quasi-square wave AC) power provided by the cable network.
The cable modem supports these main features:
•
Data Over Cable Service Interface Specifications (DOCSIS)3.0
•
Backward compatibility with existing DOCSIS 1.1 and 1.0 networks