Cisco Cisco Aironet 1552WU Outdoor Access Point Guía De Instalación

The format of the TLV block for 1100, 1130, 1200, 1240, 1250, 1300, 1520, and 1552 access points 
are listed below: 

Type: 0xf1 (decimal 241) 

Length: Number of controller IP addresses * 4 

Value: List of WLC management interfaces

To configure DHCP Option 43 for Cisco 1000, 1500, and 1550 series access points in the embedded Cisco 
IOS DHCP server, follow these steps:

Enter configuration mode at the Cisco IOS CLI. 

Create the DHCP pool, including the necessary parameters such as default router and name server. 
The commands used to create a DHCP pool are as follows:

 IP Network Netmask

 Default router

 DNS Server

Where:

pool name is the name of the DHCP pool, such as AP1000.

IP Network is the network IP address where the controller resides, such as 

10.0.15.1

Netmask is the subnet mask, such as 255.255.255.0

Default router is the IP address of the default router, such as 10.0.0.1

DNS Server is the IP address of the DNS server, such as 10.0.10.2

Cisco Aironet 1300 Series

Cisco AP c1300

Cisco Aironet 1500 Series

Cisco AP c1500

1

Cisco AP.OAP1500

2

, Cisco AP.LAP1510

2

, or 

Cisco AP.LAP1505

2

Airespace.AP1200

3

Cisco Aironet 1520 Series

Cisco AP c1520

Cisco Aironet 1550 Series

Cisco AP c1550

1. For controller release 4.1 or later.
2. For controller release 4.0, the VCI depends on the model.
3. For controller release 3.2.