Cisco Cisco Aironet 1522 Lightweight Outdoor Mesh Access Point Guía De Diseño
61
Cisco Mesh Access Points, Design and Deployment Guide, Release 7.0
OL-21848-01
Connecting the Cisco 1520 Series Mesh Access Point to Your Network
To upgrade the mesh controller software using the controller GUI, follow these steps:
Step 1
Upload your controller configuration files to a backup server.
Step 2
Follow these steps to obtain the mesh controller software and the associated boot images from the
Software Center on Cisco.com:
Software Center on Cisco.com:
a.
Click this URL to go to the Software Center:
b.
Click Wireless Software.
c.
Click Wireless LAN Controllers.
d.
Click Standalone Controllers, Wireless Integrated Routers, or Wireless Integrated Switches.
e.
Click the controller product name.
f.
Click Wireless LAN Controller Software.
g.
Click a controller software release.
Note
Verify that the software release is 6.0.
h.
Click the filename (filename.aes).
i.
Click Download.
j.
Read Cisco’s End User Software License Agreement and then click Agree.
k.
Save the file to your hard drive.
Step 3
Copy the controller software file (filename.aes) and the boot image to the default directory on your TFTP
server.
server.
Step 4
Choose Commands > Download File to open the Download File to Controller page.
Step 5
From the File Type drop-down list, choose Code.
Step 6
In the IP Address field, specify the IP address of the TFTP server.
Step 7
The default values of 10 retries and 6 seconds for the Maximum Retries and Timeout fields should work
without any adjustment. However, you can change these values. To do so, specify the maximum number
of times that the TFTP server attempts to download the software in the Maximum Retries field and the
amount of time (in seconds) that the TFTP server attempts to download the software in the Timeout field.
without any adjustment. However, you can change these values. To do so, specify the maximum number
of times that the TFTP server attempts to download the software in the Maximum Retries field and the
amount of time (in seconds) that the TFTP server attempts to download the software in the Timeout field.
Step 8
In the File Path field, specify the directory path of the controller software.
Step 9
In the File Name field, specify the name of the software file (filename.aes).
Step 10
Click Download to download the software to the controller. A message appears indicating the status of
the download.
the download.
Step 11
Disable any WLANs on the controller.
Step 12
After the download is complete, click Reboot.
Step 13
If prompted to save your changes, click Save and Reboot.
Step 14
Click OK to confirm your decision to reboot the controller.
Step 15
After the controller reboots, re-enable the WLAN.
Step 16
If desired, reload your latest configuration file to the controller.