Cisco Cisco Aironet 1522 Lightweight Outdoor Mesh Access Point Guía De Instalación
56
Cisco Aironet 1520 Series Outdoor Mesh Access Point Mounting Instructions
78-18269-04
Powering the Access Point
Step 7
Locate the stinger set-screw on the RF splitter (see
).
Figure 37
Stinger Connector Location and RF Splitter Components
Step 8
Use a Phillips screw driver, and loosen, but be careful not to remove the set-screw.
Step 9
Cut the cable stinger connector’s pin (see
) to 0.75 + 0.1 in. (1.91 + 0.25 cm).
Figure 38
Cable Stinger Connector Pin
Step 10
Insert the cable Stinger connector pin into the cable POC connector opening in the access point case.
1
RF splitter attenuator
4
RF splitter shunt
2
Cable connector plug
5
RF splitter
3
Stinger set-screw
6
Cable modem
1
Pin length is 0.75 + 0.1in. (1.91 + 0.25 cm).