Cisco Cisco 2504 Wireless Controller Guía Para Resolver Problemas

Introduction
 Prerequisites
      Requirements
      Components Used
      Conventions
 VLAN Select Feature Overview
 Platforms Supported
 Configuration through CLI and GUI
      L3 Multicast Configuration in Interface Group
      L2 Multicast Configuration in Interface Group
 Related Information

This document describes in detail the operation and configuration of the Virtual LAN (VLAN) Select
modified feature in the controller software release version 7.2.103. In addition, this document describes the
operation of the VLAN Select feature in different mobility scenarios and Multicast VLAN operation and
configuration when used with the VLAN Select feature.

In order to configure the VLAN Select feature in Wireless LAN Controller (WLC) prior to release 7.2, refer to
WLC 7.0 and Later: VLAN Select and Multicast Optimization Features Deployment Guide.

There are no specific requirements for this document.

This document is not restricted to specific software and hardware versions.

The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.

Refer to Cisco Technical Tips Conventions for more information on document conventions.