Cisco Cisco 2504 Wireless Controller 문제 해결 가이드
WLC 7.2 VLAN Select and Multicast Optimization
Features Deployment Guide
Features Deployment Guide
Document ID: 113465
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
VLAN Select Feature Overview
Platforms Supported
Configuration through CLI and GUI
L3 Multicast Configuration in Interface Group
L2 Multicast Configuration in Interface Group
Related Information
Prerequisites
Requirements
Components Used
Conventions
VLAN Select Feature Overview
Platforms Supported
Configuration through CLI and GUI
L3 Multicast Configuration in Interface Group
L2 Multicast Configuration in Interface Group
Related Information
Introduction
This document describes in detail the operation and configuration of the Virtual LAN (VLAN) Select
modified feature in the controller software release version 7.2.103. In addition, this document describes the
operation of the VLAN Select feature in different mobility scenarios and Multicast VLAN operation and
configuration when used with the VLAN Select feature.
modified feature in the controller software release version 7.2.103. In addition, this document describes the
operation of the VLAN Select feature in different mobility scenarios and Multicast VLAN operation and
configuration when used with the VLAN Select feature.
In order to configure the VLAN Select feature in Wireless LAN Controller (WLC) prior to release 7.2, refer to
WLC 7.0 and Later: VLAN Select and Multicast Optimization Features Deployment Guide.
WLC 7.0 and Later: VLAN Select and Multicast Optimization Features Deployment Guide.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
This document is not restricted to specific software and hardware versions.
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Conventions
Refer to Cisco Technical Tips Conventions for more information on document conventions.
VLAN Select Feature Overview