Cisco Cisco 2504 Wireless Controller Guía Para Resolver Problemas
Note: Some exclusions apply for static IP clients:
If a client has a static IP configured in, for example, subnet A, and they are allotted subnet B, they
will get moved to subnet A (override), before moving to the RUN state, if these conditions are met:
will get moved to subnet A (override), before moving to the RUN state, if these conditions are met:
DHCP Required is disabled on the WLAN.
♦
Subnet A is included in the VLAN or the AP group is configured on the WLAN.
♦
The client sends some packet sourced with a static IP in subnet A within the DHCP_REQD
interval (~ 2 min default value).
interval (~ 2 min default value).
♦
•
The DHCP_required interval is configurable and can have a maximum value of 120 seconds. Go to
Controller > Advanced > DHCP Parameters > DHCP timeout (5−120 seconds).
Controller > Advanced > DHCP Parameters > DHCP timeout (5−120 seconds).
•