Cisco Cisco 5508 Wireless Controller Guía De Instalación

Follow these steps to unpack the Cisco 5508 Wireless Controller and prepare it for operation:

Open the shipping container and carefully remove the contents. 

Return all packing materials to the shipping container and save it.

Ensure that all items listed in the 

 are included in the shipment. 

Check each item for damage. If any item is damaged or missing, notify your authorized Cisco sales 
representative. 

Each Cisco 5508 Wireless Controller package contains the following items:

Cisco Cisco 5508 Wireless Controller and power cord

Mounting hardware kit

Cisco product registration and Cisco documentation feedback cards

You will need the following equipment in order to install the controller:

Wireless LAN controller hardware

Controller with factory-supplied power cord and mounting hardware

Network, operating system service network, and access point cables as required

Command-line interface (CLI) console

VT-100 terminal emulator on CLI console (PC, laptop, or palmtop)

Null modem serial cable to connect CLI console and controller

Local TFTP server (required for downloading operating system software updates). Cisco uses an 
integral TFTP server. This means that third-party TFTP servers cannot run on the same workstation 
as the Cisco WCS because Cisco WCS and third-party TFTP servers use the same communication 
port.

You will need the following tools before you can install the controller:

#2 Phillips screwdriver for securing the mounting hardware

#1 Phillips screwdriver for securing captive installation screws on the power supply and fan