Cisco Cisco 4404 Wireless LAN Controller Notas de publicación
14
Release Notes for Cisco Wireless LAN Controllers and Mesh Access Points for Release 4.1.190.5
OL-31336-01
Important Notes
AP1520 Support for Four Gigabit Ethernet Ports
The AP1520 supports four Ethernet interfaces: g0–PoE in, g1–PoE out, g2–Cable and g3–Fiber. Both
the controller CLI and GUI show the state for each of the four Gigabit Ethernet ports as noted below.
the controller CLI and GUI show the state for each of the four Gigabit Ethernet ports as noted below.
•
The show mesh environment summary command displays the Up or Down status for four Ethernet
interfaces for the AP1520.
interfaces for the AP1520.
Note
•
For the four AP 1520 Ethernet ports, the Down state is noted as Dn.
•
The Up or Down (Dn) status of the four Ethernet ports is reported in the following format:
port0:port1:port2:port3. For example, UpDnDnDn indicates that port0 is Up and ports 1, 2, and 3
are Down (Dn).
port0:port1:port2:port3. For example, UpDnDnDn indicates that port0 is Up and ports 1, 2, and 3
are Down (Dn).
•
The AP1510 only reports for one Ethernet port and the Down state is reported as Down.
(controller)>show mesh env summary
AP Name
Temperature(C/F) Heater Ethernet Battery
--------
--------------- -------- ------- -------
rap1242.c9ef N/A
N/A UP
N/A
rap1522.a380 29/84
OFF UpDnDnDn
N/A
rap1522.4da8 31/87
OFF UpDnDnDn
N/A
map1522.4dcc 28/82
OFF DnDnDnDn
N/A
lap1510.2320 33/91
OFF DOWN N/A
map1522.d4af 29/84
OFF DnDnDnDn
N/A
•
The Wireless > AP Name > Details window displays the state of the four Gigabit Ethernet ports in
the Mesh Information section.
the Mesh Information section.
Figure 1
Wireless > AP1520 > Details