Cisco Cisco Email Security Appliance X1050 Guía Del Usuario
3-12
Cisco AsyncOS 8.0.2 for Email User Guide
Chapter 3 Setup and Installation
Using the System Setup Wizard
Caution
The Cisco appliance ships with a default IP address of
192.168.42.42
on the Management port of all
systems except C160/C170 systems, which use theData 1 port instead. Before connecting the Cisco
appliance to your network, ensure that no other device’s IP address conflicts with this factory default
setting. If you are configuring a Cisco M-Series appliance, please see
appliance to your network, ensure that no other device’s IP address conflicts with this factory default
setting. If you are configuring a Cisco M-Series appliance, please see
If you are connecting multiple factory-configured Cisco appliances to your network, add them one at a
time, reconfiguring each Cisco appliance’s default IP address as you go.
time, reconfiguring each Cisco appliance’s default IP address as you go.
Accessing the Web-Based Graphical User Interface (GUI)
To access the web-based Graphical User Interface (GUI), open your web browser and point it to
192.168.42.42.
192.168.42.42.
The login screen is displayed:
Figure 3-3
Logging in to the Appliance
Log in to the appliance by entering the username and password below.
Factory Default Username and Password
•
Username:
admin
•
Password:
ironport
Note
If your session times out, you will be asked to re-enter your username and password. If your session
times out while you are running the System Setup Wizard, you will have to start over again.
times out while you are running the System Setup Wizard, you will have to start over again.
Defining Basic Configuration Using the Web-Based System Setup Wizard
Procedure
Step 1
Launch the System Setup Wizard
•
Log in to the graphical user interface as described in
.
•
On brand new (not upgraded from previous releases of AsyncOS) systems, your browser will
automatically be redirected to the System Setup Wizard.
automatically be redirected to the System Setup Wizard.
•
Otherwise, on the System Administration tab, click System Setup Wizard in the list of links on the
left.
left.