Cisco Cisco Aironet 1522 Lightweight Outdoor Mesh Access Point Guía De Diseño
108
Cisco Mesh Access Points, Design and Deployment Guide, 7.2
OL-21848-03
Connecting the Cisco 1500 Series Mesh Access Point to Your Network
Note
You can also download the list of mesh access point MAC addresses and push them to the controller
using Cisco WCS. See the Cisco Wireless Control System Configuration Guide, Release 7.0.172.0:
using Cisco WCS. See the Cisco Wireless Control System Configuration Guide, Release 7.0.172.0:
Adding the MAC Address of the Mesh Access Point to the Controller Filter List (GUI)
To add a MAC filter entry for the mesh access point on the controller using the controller GUI, follow
these steps.
these steps.
Step 1
Choose Security > AAA > MAC Filtering. The MAC Filtering page appears (see
Figure 67
MAC Filtering Page
Step 2
Click New. The MAC Filters > New page appears (see
Figure 68
MAC Filters > New Page
Step 3
Enter the MAC address of the mesh access point.
Note
For 1500 series outdoor mesh access points, specify the BVI MAC address of the mesh access
point into the controller as a MAC filter. For indoor mesh access points, enter the Ethernet MAC.
If the required MAC address does not appear on the exterior of the mesh access point, enter the
following command at the access point console to display the BVI and Ethernet MAC addresses:
show interface | i Hardware.
point into the controller as a MAC filter. For indoor mesh access points, enter the Ethernet MAC.
If the required MAC address does not appear on the exterior of the mesh access point, enter the
following command at the access point console to display the BVI and Ethernet MAC addresses:
show interface | i Hardware.