Cisco Cisco TelePresence MX700 Notas De La Versión
Known limitations
Cisco TelePresence System C/EX/SX/MX Series Software Release Notes
Page 84 of 194
Known limitations
Cisco
Reference ID
Equipment
Summary
CSCud33527
Cisco TelePresence Touch 8
When switching/replacing a Touch panel on an
MX or EX series system, the main unit needs to
be restarted for the new Touch panel to pair.
Factory resetting the Touch panel does not
help.
MX or EX series system, the main unit needs to
be restarted for the new Touch panel to pair.
Factory resetting the Touch panel does not
help.
CSCts86782
EX90
Touch panel may not come up when upgrading
from TC3.1.x to TC5.x on EX90. Solution:
Upgrade to TC4.x, then upgrade to TC5.x
from TC3.1.x to TC5.x on EX90. Solution:
Upgrade to TC4.x, then upgrade to TC5.x
CSCtw52376
C20, C40, C60, C90
The Cisco VCS Provisioning (TMS Agent)
wizard is available from the CT Touch 8 for the
C20, C40, C60, C90 and all other systems with
such a codec inside, yet only the Cisco CTS EX
60/90 and Cisco CTS MX 200/300 is supported.
wizard is available from the CT Touch 8 for the
C20, C40, C60, C90 and all other systems with
such a codec inside, yet only the Cisco CTS EX
60/90 and Cisco CTS MX 200/300 is supported.
CSCtu98598
C20
If the local microphone mute icon does not
appear on the screen, issue the API command:
xConfiguration SystemUnit Type: shared.
appear on the screen, issue the API command:
xConfiguration SystemUnit Type: shared.
CSCtu99526
Any
There is a HW incompatibility between the C-
Series systems and some NEC monitors. So far
this is seen with:
NEC LCD4020
NEC P401
This incompatibility will cause the monitor to
wake up from sleep mode even if the codec is
still in sleep. This happens when the monitor is
connected using HDMI to HDMI. A workaround
is to use the DVI input of the monitors.
Series systems and some NEC monitors. So far
this is seen with:
NEC LCD4020
NEC P401
This incompatibility will cause the monitor to
wake up from sleep mode even if the codec is
still in sleep. This happens when the monitor is
connected using HDMI to HDMI. A workaround
is to use the DVI input of the monitors.
CSCtw60572
TC3-TC4.1.2
The increased call log list introduced in TC4.2
will cause systems with Cisco TelePresence
Touch 8 to go into constant reboot if
downgraded to TC4.1 or less, in the event that
the call log is larger than what is expected in
TC4.1.
Workaround:
* Clear the call history before you downgrade.
* Factory default the system after downgrade if
it goes into constant reboot.
will cause systems with Cisco TelePresence
Touch 8 to go into constant reboot if
downgraded to TC4.1 or less, in the event that
the call log is larger than what is expected in
TC4.1.
Workaround:
* Clear the call history before you downgrade.
* Factory default the system after downgrade if
it goes into constant reboot.
NA
TC5.x
CTS-MAN autodetection of endpoints:
Autodetection requires CTI monitoring to be
enabled in the device information on CUCM.
This is available in:
UCM 8.6(1) Device Pack shipping in December
UCM 8.6(2) which is not qualified for CTS-MAN
1.8
Workaround: Manually add endpoints to CTS-
MAN.
Autodetection requires CTI monitoring to be
enabled in the device information on CUCM.
This is available in:
UCM 8.6(1) Device Pack shipping in December
UCM 8.6(2) which is not qualified for CTS-MAN
1.8
Workaround: Manually add endpoints to CTS-
MAN.
CSCts99218
CTMS 1.8.0
Initial release of CTMS 1.8.0 supports 720p
only with all endpoints running TC5.0 or later.
only with all endpoints running TC5.0 or later.
CSCtr32420
Any
The C-series codecs and units with such a
codec inside it do not meet the Cisco password
codec inside it do not meet the Cisco password