Cisco Cisco Aironet 1130 AG Access Point Guía De Instalación
41
Quick Start Guide Cisco Aironet 1130AG Access Point
For more details on these LED status codes, see the “Troubleshooting”
chapter of the Cisco Aironet 1130AG Series Access Point Hardware
Installation Guide.
chapter of the Cisco Aironet 1130AG Series Access Point Hardware
Installation Guide.
Checking Basic Settings
Mismatched basic settings are the most common causes of lost connectivity
with wireless clients. If the access point does not communicate with client
devices, check the following areas.
with wireless clients. If the access point does not communicate with client
devices, check the following areas.
SSID
Wireless clients attempting to associate with the access point must use the
same SSID as the access point. If a client device SSID does not match the
SSID of an access point in radio range, the client device will not associate.
same SSID as the access point. If a client device SSID does not match the
SSID of an access point in radio range, the client device will not associate.
WEP Keys
The WEP keys that you use to transmit data must be set up exactly the same
on your access point and any wireless devices with which it associates. For
example, if you set WEP Key 3 on your client adapter to 0987654321 and
on your access point and any wireless devices with which it associates. For
example, if you set WEP Key 3 on your client adapter to 0987654321 and