Cisco Cisco Aironet 1130 AG Access Point Guía De Instalación
42
78-xxxxx-0x
select it as the transmit key, you must also set the same value for WEP Key 3
on the access point. However, the access point does not need to use WEP Key
3 as the transmit key.
on the access point. However, the access point does not need to use WEP Key
3 as the transmit key.
Refer to the Cisco IOS Software Configuration Guide for Cisco Aironet
Access Points for instructions on setting the access point WEP keys.
Access Points for instructions on setting the access point WEP keys.
Security Settings
Wireless devices attempting to authenticate with your access point must
support the same security options configured on the access point, such as
EAP or LEAP, MAC address authentication, Message Integrity Check (MIC)
WEP key hashing, and 802.1X protocol versions.
support the same security options configured on the access point, such as
EAP or LEAP, MAC address authentication, Message Integrity Check (MIC)
WEP key hashing, and 802.1X protocol versions.
If a wireless client cannot authenticate with your access point, contact the
system administrator for proper security settings in the client adapter and for
the client adapter driver and firmware versions that are compatible with the
access point settings.
system administrator for proper security settings in the client adapter and for
the client adapter driver and firmware versions that are compatible with the
access point settings.
Resetting to Default Configuration
If you forget your password that allows you to configure the access point, you
may need to completely reset the configuration. You can use the MODE
button on the access point to reset the configuration.
may need to completely reset the configuration. You can use the MODE
button on the access point to reset the configuration.