Cisco Cisco Aironet 1200 Access Point Notas de publicación
2
Introduction
OL-2898-01
Introduction
Introduction
Cisco Aironet Access Points are wireless LAN transceivers that can act as the connection point between
wireless and wired networks or as the center point of a standalone wireless network. In large
installations, the roaming functionality provided by multiple access points allows wireless users to move
freely throughout the facility while maintaining uninterrupted access to the network. The 1200 series
access point allows you to add a 5-GHz radio module for dual-radio operation, and the 2.4-GHz internal
radio is accessible and can be upgraded as new radios become available.
wireless and wired networks or as the center point of a standalone wireless network. In large
installations, the roaming functionality provided by multiple access points allows wireless users to move
freely throughout the facility while maintaining uninterrupted access to the network. The 1200 series
access point allows you to add a 5-GHz radio module for dual-radio operation, and the 2.4-GHz internal
radio is accessible and can be upgraded as new radios become available.
The access point uses a browser-based management system. The system settings are contained on web
pages in the access point's firmware. You use your internet browser, a command-line interface, or SNMP
commands to adjust access point settings.
pages in the access point's firmware. You use your internet browser, a command-line interface, or SNMP
commands to adjust access point settings.
Firmware version 11.42T resolves bug CSCdx79987.
New Features
Firmware version 11.42T resolves bug CSCdx79987 and does not include new software features.
Installation Notes
You can find the latest release of access point firmware at the following URL:
Installation in Environmental Air Space
Cisco Aironet 1200 Series Access Points are suitable for use in environmental air space in accordance
with Section 300-22(c) of the National Electrical Code.
with Section 300-22(c) of the National Electrical Code.
Note
If you plan to mount the access point in an area subject to environmental air space with the intention
of upgrading to a 5-GHz radio, Cisco recommends that you mount the access point horizontally so
that its antennas point down. Doing so results in the access point complying with regulatory
requirements for environmental air space after the 5-GHz radio is installed.
of upgrading to a 5-GHz radio, Cisco recommends that you mount the access point horizontally so
that its antennas point down. Doing so results in the access point complying with regulatory
requirements for environmental air space after the 5-GHz radio is installed.
Caution
The Cisco Aironet power injector has a smaller operating temperature range (32 to 104
o
F; 0 to 40
o
C)
than the 1200 series access point. The power injector is not intended for use in extremely high or low
temperatures or in environmental air spaces, such as above suspended ceilings.
temperatures or in environmental air spaces, such as above suspended ceilings.