Cisco Cisco Aironet 1040 Series Access Point Guía De Instalación

Americas Headquarters
Cisco Systems, Inc.

170 West Tasman Drive
San Jose, CA 95134-1706
USA

www.cisco.com
Tel: 408 526-4000

800 553-NETS (6387)

Fax: 408 527-0883

Asia Pacific Headquarters
Cisco Systems (USA) Pte. Ltd.

168 Robinson Road
#28-01 Capital Tower
Singapore 068912

www.cisco.com
Tel: +65 6317 7777
Fax: +65 6317 7799

Europe Headquarters
Cisco Systems International BV

Haarlerbergpark
Haarlerbergweg 13-19
1101 CH Amsterdam

The Netherlands
www-europe.cisco.com
Tel: 31 0 800 020 0791

Fax: 31 0 20 357 1100

Cisco has more than 200 offices worldwide. Addresses, phone numbers, and fax numbers are listed on the

Cisco Website at www.cisco.com/go/offices.

Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's
trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective
owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1005R)

Step 4

Add the option 43 line using the following syntax:

option 43 hex

<hex string>

The hex string is assembled by concatenating the TLV values shown below:

Type + Length + Value

Type is always f1(hex). Length is the number of controller management IP addresses times 4
in hex. Value is the IP address of the controller listed sequentially in hex.

For example, suppose that there are two controllers with management interface IP addresses,
10.126.126.2 and 10.127.127.2. The type is f1(hex). The length is 2 * 4 = 8 = 08 (hex). The IP
addresses translate to 0a7e7e02 and 0a7f7f02. Assembling the string then yields
f1080a7e7e020a7f7f02. The resulting Cisco IOS command added to the DHCP scope is option 43 hex
f1080a7e7e020a7f7f02.

Access Point Specifications

Table 2 lists the technical specifications for the 1040 series access point.

Table 2

Access Point Specifications

Category

Specification

Dimensions (LxWxD)

8.68 x 8.68 x 1.84 in. (22.04 x 22.04 x 4.67 cm)

Weight

1.9 lbs (0.86 kg)

Operating temperature

32 to 104 degrees F (0 to 40 degrees C)

Storage temperature

–22 to 185 degrees F (–30 to 85 degrees C)

Humidity

10% to 90% (noncondensing)

Antenna

Integrated

Compliance

The 1040 series access point complies with UL 2043 for products installed
in a building’s environmental air handling spaces, such as above suspended
ceilings.