Cisco Cisco Aironet 1200 Access Point Notas de publicación

When you upgrade an access point to run Cisco IOS software, some fields that are reported in the console 
messages during the upgrade are blank or are populated with zeros. However, blank or zero fields are 
normal after a successful upgrade, because 350 and 1200 series access points do not support that 
information. This example shows fields that might appear blank or populated with zeros:

32K bytes of flash-simulated non-volatile configuration memory.

Base Ethernet MAC Address: 00:05:9A:38:42:91

Part Number

:

0-0000-00

PCA Assembly Number

:

000-00000-00

PCA Revision Number

:

PCB Serial Number

:

Top Assembly Part Number

:

000-00000-00

Top Assembly Serial Number

:

Top Revision Number

:

Product/Model Number

:

AIR-AP352-IOS-UPGRD

This section lists new features in Cisco IOS Release 12.2(15)JA. 

 lists the features that are 

supported on the devices that support this release. 

This Cisco SWAN feature allows the access point to be set in a scanning-only mode where it scans the 
RF environment for other access points and unassociated 802.11 clients. In this mode, the access point 
does not transmit beacons, respond to probe requests, or support client device association. This mode 
allows the access point to function as an intrusion detection device to detect rogue (unauthorized) access 
points and unassociated 802.11 clients. Refer to the WLSE user documentation for instructions on 
enabling this feature. Click this link to browse to the WLSE user documentation:

1.

Cisco Aironet 350 Series Access Points support the same feature set as an 1100 series access point, except that a 350 
series access point cannot serve as a WDS access point.

Access Point Scanning-Only Mode

x

x

x

Client tracking

x

x

x

IEEE 802.11d World Mode Support

x

x

x

Cisco Compatible Extensions information element

x

x

x

MAC address local authentication

x

x

x

IEEE 802.1X Support for EAP-FAST

x

x

x