Cisco Cisco Aironet 1240 AG Access Point Guía De Instalación

The access point ships with its radio disabled and no assigned IP address or 
service set identifier (SSID). You must enable them when you configure the 
access point for the first time. The access point no longer is assigned an IP 
address. It is configured to obtain an IP address by using a DHCP server. If 
your network does not use a DHCP server, you must connect to the access 
point console port and assign a static IP address (See the 

Blue

Normal operating condition and at 
least one wireless client device is 
associated with the access point.

Light green

Normal operating condition, but no 
wireless client devices are 
associated with the access point.

Amber or red

Error condition. See the 

.