Cisco Cisco Aironet 1600i Access Point Manual Técnica
Both APs are now configured with SSIDs for LEAP authentication, and the WDS server acts as the local
RADIUS. Use the same steps for an external RADIUS; only the RADIUS server IP will change.
RADIUS. Use the same steps for an external RADIUS; only the RADIUS server IP will change.
Enable WDS on WDS AP
This procedure describes how to enable WDS on the WDS AP:
Navigate to Wireless > WDS > General Set−Up tab, and enable the check box Use this AP as
Wireless Domain Services. This enables the WDS service on the AP.
Wireless Domain Services. This enables the WDS service on the AP.
1.
In a network with multiple WDS APs, use the Wireless Domain Services Priority option in order to
define the primary WDS and the backup WDS. The value ranges from 1−255, where 255 is the
highest priority.
define the primary WDS and the backup WDS. The value ranges from 1−255, where 255 is the
highest priority.
2.
Navigate to the Server Groups tab on the same page. Create an infrastructure server group list, to
which all the WDS client APs will authenticate. You can use the local RADIUS server on the WDS
AP for this purpose. Since it has already been added, it appears in the drop−down list.
which all the WDS client APs will authenticate. You can use the local RADIUS server on the WDS
AP for this purpose. Since it has already been added, it appears in the drop−down list.
3.